If you are relatively new to DNP3 you might under-estimate the value of certification.

Compared with a protocol like Modbus, DNP3 has way more features. That’s another way of saying that it is a lot more complex.

Modbus compliance is very easy to test. Suppose you have an RTU with Modbus Slave – a unit which will be polled by a master PLC or RTU. To test it, you can download any one of a number of free or demo Modbus tools and check that you can read a set of registers and write to a set of registers. That’s not the complete functionality of Modbus but it does confirm that the basic functionality works – and because the protocol is so simple, the product vendor is unlikely to have got it wrong. One tool readily available is the Kepware OPC server and you can download a demo version from their website.

As the end-user or system integrator implementing DNP3, if you have to put together a master from one supplier and a slave from another, when it doesn’t work who do you call? Or if you are taking advantage of the fact that DNP3 is an open protocol supported by many vendors you might be choosing a number of different field products – each one suited best for the application at hand.

DNP3 has the flexibility you need for reliable, secure telemetry but there’s a lot of features to test.

The smartest approach is to get the vendor to do it for you before you start using the product or software. If you ask for an independent certification you know that the protocol has been tested by someone who’s reputation is on the line if they miss something.

To get an idea of what gets tested in DNP3 certification you can see a copy of a full test report on the MultiSmart RTU on our main site, under the product manuals section of MultiSmart – www.multitrode.com/pump-station-manager/product-manuals.html

admin SCADA & Telemetry DNP3, RTU, SCADA, telemetry