Products

PumpView
Secure web-based control, monitoring and alarming for water and wastewater networks.

Site details page for a 2-pump station with MultiSmart - PumpView v4

PumpView is a revolutionary new system which allows the highly successful MultiSmart pump station manager to be controlled and monitored via the web.

Secure
No capital cost except for field hardware
Low risk
Significant reduction in operational costs due to wealth of data from the site
Try it today

The only IT infrastructure which is needed for the organisation is a web-browser (Internet Explorer 6/7) and an internet connection.

The PumpView system uses the cellular network to communicate to the sites.

Request a Demo

Whether you are a utility (or you own or manage other pump station assets), a system integrator or an engineering consultant - there is nothing like seeing PumpView for yourself and being able to ask questions of our experienced staff.

Click the button to request a demonstration..

	The PumpView system was installed and we were able to look at faults, reports, monitor levels, pump starts, hours, alarms, high levels... everything all remotely. The big advantage was being able to respond to an SMS message, see what the problem is and fix it any time of day or night, from work, my laptop or from my PC at home. The manager thought it was great. Ideally we want to put all pump stations onto the new system. This will save us money on new equipment as well as savings on call outs and other false responses that used to cause us problems."
	Paul Minks, City of Charles Sturt

Charles Sturt Case Study (475kb PDF)
Read the case study

View more screen shots..

What can I see in PumpView?

Status of the entire network
Drill down into individual pump stations and reservoirs
Level in %
Pump and alarm setpoints
Hours run, starts and faults accumulators
Mode and availability of pumps
Detailed pump fault descriptions
3-phase supply, DC supply
Power & energy
Insulation resistance for motor windings
Inflow rates
Alarms for the entire network
Receive and acknowledge detailed alarms via SMS, email and voice

What can I control in PumpView?

Change the mode of pumps - auto / off / hand (manual)
Reset level alarms
Reset pump faults
Change the setpoint profile
Automatically fill reservoirs from remote pump stations

What can I configure in PumpView?

Additional users, their contact methods and their security privileges
Alarm contact lists
Individual alarm points on each site with type of alarm, time between contacting each user
I/O - zero and span for analogs, names, make an I/O point an alarm

PumpView Reports

PumpView administrative users get daily reports emailed in .csv format, including:

hours run, starts accumulators
fault report - date/time stamp, fault active/inactive, pump station
alarm log - all user alarm interaction including when each user was notified, by what method (email/SMS/voice), who noted the alarm
user interaction log - all user interaction with their remote sites

View sample reports

How can I use PumpView on my existing MultiSmart field hardware

All that is needed is the PumpView modem to be installed at site along with an upgrade to the MultiSmart.
Then log on to www.pumpview.com and start using your new system.

Can I trial PumpView?

Contact us if you would like to log into the PumpView web page to see a couple of trial sites running.

Also, if you would like to trial PumpView for one month, contact your nearest MultiTrode distributor or sales office.