|
 PumpView is the next generation in control and monitoring software for smaller wastewater utilities. Instead of going through the design process, taking a big leap of faith, and implementing a large capital works project - you can monitor and control your watewater collection or water supply system - via the web.
You can start today. And you can do it securely.
- Significant reduction in operational costs due to wealth of data from the site
- Remote control - reset faults, control pump (auto / off / manual)
- Low risk - no capital cost except for field hardware
- Try it today
The only IT infrastructure which is needed for the organisation is a web-browser (Internet Explorer 6/7) and an internet connection.
The PumpView system uses the cellular network to communicate to and from the sites, and the internet to give you visibility and control of your system.
Request a Demo
Whether you are a utility (or you own or manage other pump station assets), a system integrator or an engineering consultant - there is nothing like seeing PumpView for yourself and being able to ask questions of our experienced staff.
 |
The PumpView system was installed and we were able to look at faults, reports, monitor levels, pump starts, hours, alarms, high levels... everything all remotely.
The big advantage was being able to respond to an SMS message, see what the problem is and fix it any time of day or night, from work, my laptop or from my PC at home.
The manager thought it was great. Ideally we want to put all pump stations onto the new system. This will save us money on new equipment as well as savings on call outs and other false responses that used to cause us problems."
Paul Minks, City of Charles Sturt
|
 Read the PumpView Case Study from Charles Sturt
|
| |
|
What Screens can I see in PumpView?
Site details page for a 2-pump station
View more PumpView screenshots
What can I see in PumpView?
- Status of the entire network
- Drill down into individual pump stations and reservoirs
- Level in %
- Pump and alarm setpoints
- Hours run, starts and faults accumulators
- Mode and availability of pumps
- Detailed pump fault descriptions
- 3-phase supply, DC supply
- Power & energy
- Insulation resistance for motor windings
- Inflow rates
- Alarms for the entire network
- Receive and acknowledge detailed alarms via SMS, email and voice
What can I control in PumpView?
- Change the mode of pumps - auto / off / hand (manual)
- Reset level alarms
- Reset pump faults
- Change the setpoint profile
- Automatically fill reservoirs from remote pump stations
What can I configure in PumpView?
- Additional users, their contact methods and their security privileges
- Alarm contact lists
- Individual alarm points on each site with type of alarm, time between contacting each user
- I/O - zero and span for analogs, names, make an I/O point an alarm
PumpView Reports
- hours run, starts accumulators
- fault report - date/time stamp, fault active/inactive, pump station
- alarm log - all user alarm interaction including when each user was notified, by what method (email/SMS/voice), who noted the alarm
- user interaction log - all user interaction with their remote sites
View sample reports
How can I use PumpView on my existing MultiSmart field hardware
All that is needed is the PumpView modem to be installed at site along with an upgrade to the MultiSmart.
Then log on to www.pumpview.com and start using your new system.
Can I trial PumpView?
Contact us if you would like to log into the PumpView web page to see a couple of trial sites running.
Also, if you would like to trial PumpView for one month, contact your nearest MultiTrode distributor or sales office.
|
